|
| |
TM 10-4320-324-14
5-17. Engine Assembly Replacement (CONT).
c.
Installation.
(1)
Install two engine lifting eyes (15).
(2)
Carefully raise engine assembly clear of stand and position on frame.
(3)
Slowly lower engine assembly and position in intermediate bracket, alining flexible coupling with pump
connecting ring. This will require slow movement of engine assembly.
(4)
When coupling and ring are alined, push engine assembly forward until coupling completely engages.
Ensure studs of intermediate bracket aline with holes on engine assembly.
(5)
Install four screws (14), four beveled washers (13), eight washers (12), and four self-locking nuts (11).
(6)
Install two screws (10), four washers (8), two beveled washers (9), and two self-locking nuts (8).
5-52
|
