|
| |
TM 10-4320-324-14
CAUTION
Do not drop capscrews or washers into timing cover. A clean shop cloth placed inside case will catch tools
or hardware.
(5)
Remove three capscrews (11), three lockwashers (12), and three washers (13).
(6)
Remove four nuts (14) and four washers (15).
(7)
Holding injection pump drive gear (16) in mesh, carefully remove injection pump (17) and gasket (18).
NOTE
Do not rotate crankshaft; leave engine in No. 1 TDC position.
(8)
Remove nut (19) from pump shaft.
(9)
Use standard puller and remove hub (20).
(10)
If damaged, remove four studs (21).
5-33
|
