|
| |
TM 10-4320-324-14
4-60
Support Legs Replacement
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Tools
Equipment Condition
Tool kit, general mechanics: automotive, item 32,
Engine shut down (para 2-7).
section III, appendix B
a.Removal.
(1) Place jack stands under towbar and rear of unit.
(2) Place chocks at front and rear of wheels. Tilt entire assembly until enough clearance is attained for
removal of support legs (1).
(3) Remove two retaining pins (2), two anchor pins (3), and two support legs (1).
b.
Installation.
(1) Install two retaining pins (2), two anchor pins (3), and two support legs (1).
(2) Remove chocks at front and rear of wheels.
(3) Remove jack stands under towbar and rear of
END OF TASK
4-189
|
