|
| |
TM 10-4320-324-14
(2) Install wires on control panel as follows:
(a) Install eight wires (27) and six screws (26) on relay (28).
(b) Install five wires (24) and two screws (23) on rheostat (25).
(c) Install three lockwashers (21), five wires (20), and three nuts (19) on oil pressure gauge (22).
(d) Install three lockwashers (17), six wires (16), and three nuts (15) on tachometer (18).
(e) Install flat washer (12), lockwasher (13), two wires (11), and two nuts (10) on ammeter (14).
(f) Install seven wires (8) and four screws (7) on emergency stop switch (9).
(g) Install two wires (5) and two screws (4) on oil bypass switch (6).
(h) Install two wires (2) and two screws (1) on starter switch (3).
4-187
|
