|
| |
TM 10-4320-324-14
NOTE
Tag all wires before removing from terminal
board.
Remove wires on terminal board that are from
control panel only.
(3) Remove screws (11) and wires (12). Tag wires.
(4) Remove control panel (7).
b.
Disassembly.
NOTE
Tag all wires before removal.
(1) Remove wires from control panel as follows:
(a) Remove two screws (1) and two wires (2) from starter switch (3).
(b) Remove two screws (4) and two wires (5) from oil bypass switch (6).
4-179
|
