|
| |
TM 10-4320-324-14
(5) Remove three nuts (11), three flat washers
(12), three bolts (13), and air feeder (14).
(6) Remove three bolts (15), three flat washers
(16), and three clamps (17).
(7) Remove sealing brush (18) and sealing
section (19).
b.
Installation.
(1) Install sealing section (19), sealing brush
(18), three clamps (17), three flat washers
(16), and three bolts (15).
(2) Install air feeder (14) with three bolts (13),
three flat washers (12), and three nuts (11).
(3) Install blower extension (10) with six flat
washers (9), six screws (8), six flat washers
(7), and six self locking nuts (6).
(4) Install two flat washers (5), two screws (4),
two flat washers (3), two lockwashers (2),
and two nuts (1).
END OF TASK
4-103
|
