|
| |
TM 10-4320-324-14
4-26. Spark Arrestor Repair/Replacement (CONT).
c.
Cleaning/Inspection.
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles
and gloves and use only in a well ventilated area. Avoid contact with skin, eyes,
and clothes and don't breathe vapor. Do not use near open flame or excessive
heat. The flash point is 100°F-138°F (38°-50°C). If you become dizzy while using
cleaning solvent, get fresh air immediately and get medical aid. If contact with
eyes is made, wash your eyes with water and get medical aid immediately.
(1)
Clean all parts with dry cleaning solvent P-D-680 and wire brush.
(2)
Inspect all parts for cracks and holes.
(3)
Replace damaged parts.
d.
Assembly.
(1)
Install and aline baffles (9) and plate (8) on base (10).
(2)
Install cap (7), flat washer (6), and nut (5).
e.
Installation. Install spark arrestor assembly (4) with u-bolt (3), clamp base (2), and two nuts (1).
f.
Follow-on Maintenance. Install exhaust screen (para 4-11).
END OF TASK
4-90
|
