|
| |
TM 10-4320-324-14
(9)
Remove two nuts (38), two lockwashers (39), four flat washers (40), and two screws (41).
(10)
Remove three nuts (42), three lockwashers (43), six flat washers (44 and 45), three screws (46), limiter (47),
and cover (48).
(11)
Remove six nuts (49), six lockwashers (50), twelve flat washers (51), six screws (52), and cover (53).
b.
Cleaning/Inspection.
(1)
Inspect all sheet metal parts for holes, cracks, deformation, or other obvious damage. Replace if defective.
(2)
Inspect brackets for cracks or deformation. Replace if defective.
(3)
Inspect cover for holes or tears. Replace if defective.
4-63
|
