|
| |
TM 10-4320-324-14
4-16. Control Box Panels Repair/Replacement.
This task covers:
a.
Removal
c.
Installation
b.
Cleaning/Inspection
d.
Follow-on Maintenance
INITIAL SETUP:
Tools
Equipment Condition
Tool kit, general mechanics: automotive
Control panel wiring harness disconnected
section III, item 32, appendix B
(para 4-59).
Drill, electric, item 33, section III, appendix B
Control panel removed (para 4-59).
Throttle control rod removed (para 4-39).
Materials/Parts
Starting aid pump removed (para 4-46).
Self-locking nut (6) - MS17829-4C
Roof panels removed (para 4-13).
Rivet (4) - MS20470AD8-8
Lockwasher (5) - MS35338-44
Seal - 13229E8478
Lockwasher (41) - MS35338-45
a.
Removal.
(1) If damaged, remove retainer ring (1) and latch
(2).
(2) Remove four nuts (3), four lockwashers (4), four
flat washers (5), four screws (6), and control box
door (7).
(3) If damaged, drill out four rivets (8) and remove
two door hinges (9).
(4) If damaged, remove insulation (10) from control
box door (7).
4-51
|
