|
| |
TM10-4320-316-14
5-7.
MOUNTING PLATE REPAIR AND REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools Required
Tool Kit, General Mechanic's (Appendix B, Item 1)
Material's Required
Cloth, Lint-Free (Appendix E, Item 1)
Brush, Medium Bristle (Appendix E, Item 2)
Solvent, Dry Cleaning (Appendix E, Item 3)
Equipment Condition
DED pump assembly shut down and cool.
Inlet enclosure removed (see paragraph 4-22).
Outlet enclosure removed (see paragraph 4-23).
a.
Removal. (Refer to Figure 5-1).
(1)
Remove four screws (1), four nuts (2), four flat washers (3), four flat washers (4), and four nuts (5).
(2)
Remove mounting plate (6) from engine (7).
b.
Installation.
(1)
Install mounting plate (6) onto engine (7).
(2)
Install four nuts (5), four flat washers (4), four flat washers (3), four nuts (2), and four screws (1).
5-4
|
