|
| |
TM 10-4320-316-14
4-33. RECOIL STARTER AND COOLING FAN CASE REPAIR AND REPLACEMENT.
This Task Covers:
a. Removal
b. Inspection
c. Repair.
d. Installation
Initial Setup:
Tools Required
Tool Kit, General Mechanic's (Appendix B, Item 1)
Material's Required
Seal, (Refer to TM10-4320-316-24P)
Equipment Condition
DED pump assembly shut down and cool.
NOTE
If you are only replacing the recoil starter, only perform removal steps (1) and (2) of the
baffle removal procedure.
Baffles removed (see paragraph 4-21).
a. Removal (Refer to Figure 4-25).
(1)
Remove four bolts (1).
(2)
Remove the recoil starter assembly (2) as a self-contained unit.
(3)
Remove four bolts (3), four washers (4), four collars (5), and four rubber cushions (6).
(4)
Remove cooling fan case (7) and seal (8). Discard seal.
(5)
Remove screw (8) and cover (9).
4-74
|
