|
| |
TM 10-4320-311-14
i.
Fabricate appropriate acoustical foam (8). Refer to Appendix F for replacement.
j.
Peel off protective backing.
k.
Place acoustical foam over prepared areas, in correct position, and press firmly in place.
INSTALLATION:
a.
Position sound enclosure rear panel assembly (5) on frame (6) and secure to tie rod with washer and wingnut (7).
b.
Secure sound enclosure rear panel assembly (5) to frame (6) with three nuts, washers, and cap screws.
c.
Align lifting handle assembly and strap plate (3) to frame (6) and secure with nuts, washers, and cap screws (4).
d.
Install discharge coupling elbow (2).
e.
Position spark arrestor (1) and secure with clamp.
4-34
|
