|
| |
TM 10-4320-311-14
4-15. Replace Ground Rod and Attaching Hardware.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment
Condition
Tool Kit, General Mechanics (Item 1,
Para
Appendix B, Section III)
2-5
Ground rod removed from earth
and ground cable disconnected
from pump.
Engine shut down.
Figure 4-7. Ground Rod and Attaching Hardware
REMOVAL: Refer to Figure 4-7.
a.
Loosen hex bolt (5) securing ground cable (2) to ground lug terminal (1).
b.
Remove ground lug terminal (1) from ground cable (2).
c.
Loosen hex bolt (6) securing ground cable (2) and rod clamp (3) to grounding rod (4)
d.
Remove ground cable (2) and rod clamp (3) from grounding rod (4)
INSTALLATION'
a.
Insert ground cable (2) and grounding rod (4) into hole in the rod clamp (3).
b.
Tighten hex bolt (6) to secure ground cable (2) and rod clamp (3) to grounding rod (4).
c.
Insert ground cable (2) into hole in ground lug terminal (1).
d.
Tighten hex bolt (5) to secure ground lug terminal (1) to ground cable (2)
4-23
|
