|
| |
TM 10-4320-311-14
CLEANING:
WARNING
Death or serious Injury could occur if fuel is not handled carefully. Use in a well-ventilated area
away from open flame, arcing equipment, ignition sources, heaters, or excessive heat. Always
store fuel in proper, marked containers
DO NOT SMOKE.
Death or serious injury could occur if compressed air is directed against the skin. Do not use
compressed air for cleaning or drying unless the pressure is/has been reduced to 30 psi (2. 11
kgcm2) or less. When working with compressed air always use chip guards, eye protection, and
any other protective equipment.
Clean all components with clean diesel fuel and dry with compressed air.
REPAIR:
Repair by replacing damaged components.
ASSEMBLY:
a.
Install cables (14 and 15) into clamp (19) and secure with setscrews (18)
b.
Install bushing (17) into body (3).
c.
Attach ground wire plug (13) to cable (14).
d.
Attach cable (15) to bushing (17) with plug screw (16).
e.
Install new O-ring (12). Attach spout (10), nozzle strainer (11), and O-ring (12) to body (3).
f.
Attach two cap chain links (6), chain (7), and compression spring (8) to cap (9) and body (3).
g.
Attach nozzle cap (5) to body (3).
h.
Attach dust plug (1) and new gasket (4) to coupler (2). Attach dust plug (1) and coupler (2) to body (3).
4-17
|
