|
| |
TM 10-4320-311-14
5-15. Replace/Inspect Frame Assembly, Base Plate, and Shock Mounts.
This task covers:
a.
Removal
b.
Inspection
c.
Installation
INITIAL SETUP
Tools
Equipment
Tool Kit, General Mechanics (Item 1,
Condition
Appendix B, Section III)
5-12
Engine removed
REMOVAL: Refer to Figure 5-9
a.
Remove four nuts (1) and four washers (2) from bolts (3) attaching engine base plate (4).
b.
Remove engine base plate (4) from frame (5).
c.
Remove four hex head bolts (6), nuts (7), and flat washers (8) from engine base plate (4).
NOTE
Never replace one shock mount. If one shock mount requires changing, then all four shock
mounts must be changed.
INSPECTION:
Inspect and replace damaged shock mounts (9)
INSTALLATION:
a.
Install four hex head bolts (6) through engine base plate (4), and four spacer nuts (7) and four washers (8) on top
of engine base plate.
b.
Install four hex head bolts (3) and washers (2) from the bottom into frame (5).
5-20
|
