|
| |
TM 10-4320-311-14
4-33. Replace Frame Handles
This task covers:
a)
Removal
b)
Installation
INITIAL SETUP
Tools
Tool Kit, General Mechanics (Item 1,
Appendix B, Section III)
Figure 4-37. Handles and Posts
REMOVAL: Refer to Figure 4-37.
a.
Observe and note the location of the two washers (1).
b.
Remove hex nut (2), hex bolt (3), and two washers (1) securing handle (4) to post (5).
c.
Remove handle (4).
d.
Remove two hex nuts (6), two hex bolts (7), and two washers (8) securing post (5) and ratchet strap bolt plate to
frame (9).
e.
Remov e post (5).
INSTALLATION
a.
Secure ratchet strap bolt plate and post (5) to the frame with two washers (8), two hex bolts (7), and two hex nuts
(6).
b.
Secure handle (4) to post (5) with two washers (1), hex bolt (3), and hex nut (2).
c.
Verify that the two washers (1) are properly positioned.
4-69
|
