|
| |
TM 10-3835-231-13
2-1. GENERAL. - continued
(5)
Fuel Sampling Assembly. Used to draw samples of fuel flowing from the pipeline into the Tactical
Petroleum Terminal to check the type of fuel coming in and to make spot checks of the fuel quality. The cylinders (1) are
used to collect the fuel sample, and hydrometers (2) are used to check the specific gravity of the sample. A 1/2 inch ball
valve (3) controls flow through the sampling assembly while the 1/2 inch needle valve (4) controls the flow of fuel into the
collection cylinder.
Figure 2-5. Fuel Sampling Assembly
(6)
Pressure Regulating Valve Assembly. Used to reduce the high working pressure used in the pipeline to the
lower working pressure used in the Tactical Petroleum Terminal. Valves and gauges are provided to adjust the regulator
and monitor the pressure.
Figure 2-6. Pressure Regulating Valve Assembly
2-4
|
