|
| |
TM 10-3835-231-13
i.
Connect 4 each (total of eight) 4-inch x 12 feet Cam-lock hoses (10) from tanks (1) to suction side of pump (2).
j.
Connect 2 each 4 inch x 25 feet Cam-lock hoses (11) to discharge side of pump (2).
k.
Check that quick disconnect gasket (12) are in place and install 4 inch x 3-inch reducer (13) and 3 inch ball valve
(14).
l.
Place 2 each drip pan (15), absorbent oil material (16) and storage drum (17) where they will be available for use if
needed.
m.
Inspect all connections to verify correct installation of flanges, coupling gaskets, clamps, and security of Camlock
devices.
4-19
|
