|
| |
TM 10-3835-219-14
b. Tackle Block (Figure 3-2)
(1) Apply a coat of general purpose oil to pin (1).
(2) Apply a coat of general purpose oil to sheave (2).
Figure 3-2. Tackle Block, Lubrication.
c. Hoist Chain. (Figure 3-3)
(1) Apply either machine oil or gear oil to load chain (1). Wipe off excess, but allow lubricant to remain between
links where wear occurs.
(2) Apply a few drops of oiI to guide roller shafts (2).
(3) Apply a few drops of oil to neck of hook (3).
F i g u r e 3 - 3 . H o i s t C h a i n , L u b r i c a t i o n .
3 - 2
|
