|
| |
TM 10-3835-219-14
CHAPTER 3
OPERATOR MAINTENANCE INSTRUCTIONS
Page
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..3-1
Section I.
Operator Maintenance Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...3-1
Section Il. OperatorTroubleshooting Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...3-4
OVERVIEW
This chapter contains operator level maintenance instructions.
Section l. OPERATOR MAINTENANCE INSTRUCTIONS
Paragraph
Page
3-1
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...3-1
3-1.
General. Keep all lubricants in closed containers and store in a clean dry area away from excessive heat. Do not allow
dust, dirt, or other foreign matter to mix with the lubricants. Keep the lubrication equipment clean and ready for use. Before
lubricating the equipment wipe all lubrication points to remove dirt and grease. After lubricating,clean all lubricatins points
of any spilled or excessively applied lubricant to prevent accumulation of dirt and foreign matter. Keep all external surfaces
and parts not requiring lubrication free of lubricants. Lubricate components of the hoseline outfit in accordance with the following
instructions.
a. Chest Assemblies. (Figure 3-1)
(1) Apply a coat of general purpose oil to hinge (1).
(2) Apply a coat of general purpose oil to latches (2).
(3) Apply a coat of general purpose oil to pivot points of handles (3).
(4) Apply a coat of general purpose oil to lid supports (4).
Figure 3-1. Chest Assemblies, Lubrication.
Change 1 3-1
|
