|
| |
T M 1 0 - 3 8 3 5 - 2 1 9 - 14
S e c t i o n I l.
E Q U I P M E N T D E S C R I P T I O N A N D D A TA
Paragraph
P a ge
1 -7
Equipment Characteristics, and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..1-5
1 - 8
Location and Description of Major Components (Model ADC-1200) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...1-5
1 - 9
Location and Description of Major Components (Model 1461) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...1-9
1 - 10
Equipment Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-16
1-11
Safety, Care and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . .1-18
1-7. Equipment Characteristics and Features. The 4 Inch Fuel Handling Hoseline Outfit, is
compact, and can transport bulk fuel at a rate of 350 gpm. The Hoseline outfit allows rapid hose unpacking, laying,
and repacking.
1-8. Location and Description of Major Components. (Model ADC-1200) (figure 1-3).
SLING ASSEMBLY. Used for lifting flaking boxes. Constructed of steel pipe, wire cables, attach hooks, and a lift
ring.
HOSE ASSEMBLY AND FLAKING BOX. The hoseline outfit consists of 13 hose assembly and flaking boxes.
Each hose consists of two 500-foot (150m) sections of collapsible hose coupled together per flaking box. The
flaking box provides for packing and transportation of the hoses. The box is of steel weldment construction with
lifting provisions.
ROADWAY CROSSING GUARD. The hoseline outfit consists of 20 roadway crossing guards. The guard is a steel
channel that provides protection of hoseline when routed under road surfaces and train tracks.
DISPLACEMENT AND EVACUATION AND REPAIR KITS CHEST ASSEMBLY (figure 1-4). A welded assembly
that contains compartments for the storage of the displacement and evacuation and repair kits.
REPAIR KIT. Consists of four hose clamps, a banding tool, a box of strapping seals (banding buckles), three
quarts (2.85L0 of cleaning solvent, five cans of rubber adhesive, a hammer, a 5-pound (2.27 kg) pack of wiping
rags, 350 ft. vinyl tape, a common screwdriver, a knife, a 1-1/16 inch socket, a socket wrench, 150 ft. rubber
tape, two 100–foot (30m) rolls of strapping, two T handle hex keys, ten hose adapters, eight pipe coupling
clamps, and two grooved coupling rings. The kit is used to repair hoselines.
DISPLACEMENT AND EVACUATION KIT. Consists of an ejector assembly, ball inlet, displacement ball, ball
receiver, eight coupling clamps, and 16 pipe caps, The kit is used to remove liquid fuel, vapors, and air from
hoselines to that they can be easily packed into flaking boxes.
SUSPENSION AND PACKING KIT CHEST ASSEMBLY (figure 1-5). A welded assembly that contains
compartments for the storage of the suspension and packing kits.
SUSPENSION KIT. Consists of four tackle blocks, 25 wire rope clamps, a 350-foot (105m) spool of wire rope, a
350-foot (105m) spool of manila rope, 60 fabric hose saddles, 60 shackles, 14 guy stakes, four wire rope thimbles,
and four turnbuckles.
PACKING KIT. Consists of a pullboard assembly, two left- and two right-hand hose-retaining brackets, and a
3/4-ton (675 Kg) chain host.
FLOW CONTROL KIT (figure 1-6). Consists of eight pipe coupling clamps, two coupling halves quick disconnect
(female), two coupling halves quick disconnect (male), two hose assemblies, two grooved-to-external-thread
couplings, two grooved-to-internal thread couplings, a strainer assembly, two check valves, a tee, steel fish tape,
two gate valves, and a metal chest assembly. The kit is used to control the flow of fuel in the hoseline under all
operating conditions.
1 -4
|
