SECTION IV. ASSEMBLY, FABRICATION, AND INSTALLATION INSTRUCTIONS

TB 10-4500-200-13

SECTION IV

ASSEMBLY, FABRICATION, AND INSTALLATION INSTRUCTIONS

10. Fill and Vent Assembly

b. Fabricate and assemble material as shown in

a. Refer to table 1 for the required parts.

b. Assemble and install parts as shown in fgure

13. Drum Stand, 55-Gallon, Style B

a. Refer to table 4 for the required material.

11. Manifold Assembly

b. Fabricate and assemble material as shown in

a. Refer to table 2 for the required parts.

b. Assemble and install parts as shown in figure

14. Drum Stand, 55-Gallon, Style C

a. Refer to table 5 for the required material.

12. Drum Stand, 55-Gallon, Style A

b. Fabricate and assemble material as shown in

a. Refer to table 3 for the required material.